Will These Keycaps Fit My Keyboard?
The three things that decide whether a keycap set fits: the stem, the layout and the bottom row. How to check yours in two minutes before you buy.
Most keycaps fit most mechanical keyboards. "Most" is doing some work in that sentence, though, so here are the three things that decide it, in the order they catch people out.
1. The stem: the little cross under every key
Pull one key off (a letter is safest; there's a how-to here) and look at what it was sitting on.
- A plus-shaped "+" cross is the MX-style stem. It's on the great majority of mechanical keyboards, whatever brand of switch is underneath, and it's what almost every keycap here is made for. You're good.
- A low, flat switch with two small prongs is a low-profile "Choc" style switch. Normal keycaps won't go on it. Look for caps sold specifically as low profile for that switch.
- A round dome or a rubber cup is a Topre-style or membrane board, and aflat scissor clip is a laptop-style keyboard. Neither takes mechanical keycaps.
Every keycap product page here states the stem type. If it says MX and your board has the "+" cross, the stem is sorted.
2. The layout: ANSI or ISO, and how many keys
ANSI vs ISO is about the Enter key. ANSI (the usual Australian and US layout) has a wide, flat Enter and a long left Shift. ISO (common in the UK and Europe) has a tall, upside-down L-shaped Enter and a short left Shift with an extra key beside it. Most sets are ANSI; if your Enter is the tall one, check the set includes ISO keys.
Board size decides how many keys you need:
| Size | Roughly | What's missing |
|---|---|---|
| Full size (100%) | 104โ108 keys | Nothing: number pad and all |
| TKL (80%) | 87โ88 keys | No number pad |
| 75% | about 84 keys | No number pad, everything squeezed together |
| 65% | about 68 keys | No function row; arrows kept |
| 60% | about 61 keys | No function row, no arrows |
A full set made for a big board covers the smaller ones too: you'll just have spares. The catch goes the other way. A set made for a 60% won't have a number pad, and compact boards (75% and 65% especially) often use a shorter right Shift (1.75u instead of 2.75u) that bigger sets don't always include. Our compact-board sets and full-size sets are split for exactly this reason.
3. The bottom row: the one that trips everyone up
Keycap sizes are measured in "u", the width of one letter key. A standard bottom row has a 6.25u spacebar with 1.25u keys either side (Ctrl, Win, Alt). Most custom sets are made for that.
Some big-brand gaming keyboards use a non-standard bottom row: a shorter or longer spacebar, or 1u and 1.5u modifiers. On those boards the letters, numbers and everything above fit perfectly; the bottom row may not. Measure your spacebar: about 117 mm long is a standard 6.25u. If yours is noticeably different, either keep your original bottom row or look for a set that lists your spacebar size.
The two-minute check before you buy
- Pull a letter key. Is there a "+" cross? Then it's MX-style.
- Look at Enter. Wide and flat is ANSI; tall is ISO.
- Count roughly: number pad? Function row? Arrows? That's your size.
- Measure the spacebar. About 117 mm means a standard bottom row.
- Check the product page lists the keys you need, especially the right Shift on a compact board.
Only want to change a few keys? Then fit is almost never a problem. A single novelty cap for Esc or an arrow cluster goes on any MX-style board. Start with individual keycaps or the small sets.
And if all of this sounds like a lot: it's two minutes, it saves a set going in a drawer, and the drawer has enough keycaps in it already. Ask us how we know.

















